WOG Plus
Fast-Drying, Hard-Set, Thread and Gasket Sealant
Features
Jomar’s W.O.G Plus is a fast drying, hard setting, semi-paste, thread and gasket sealer. It remains flexible, so vibrations will not loosen connection. W.O.G plus seals tightly but allows for disassembly without damage to parts. It is lead free, halogen free, non-corrosive and nontoxic.
Directions
Threaded Directions
Stir well before using. Clean threads. Brush liberally onto male threads only. Allow to set for 5 minutes. Make up joint and apply appropriate torque as required. Keep container closed at all times when not in use.
Flange / Gasket Directions
Stir well before using. Clean flange and gasket. Brush liberally onto both sides of flange and gasket. Allow to set for 5 minutes. Assemble in a normal manner. Keep container closed at all times when not in use.
| Temperature & Pressure Ratings |
|---|
| Brushable to: | -50°F (-45°C) |
| TTC 58°F (14°C) | |
| Ignition Temp: | 901°F (482°C) |
| Temperature Range: | -50°F to 400°F (-45°C to 204°C) |
| Pressure Ratings | Gas – 2500 PSI (176 kg/cm²) Liquid – 10000 PSI (703kg/cm²) |
| VOC: | 294 g/l |
Featured Products
High Temperature Nickel Anti-Seize Lubricant and Thread Sealant
